Kitchen Lab / Mixed sizes
Which drops
own the surface?
Water touches every oil drop in a dressing. How little oil in small drops can make most of the surface?
Loading the geometry. Controls and setup links become available when ready. A linked setup stays in the address if loading fails.
Same oil, two sizes.
Move the oil.
0%Half100%
The larger drops have a radius of 40 µm. One µm is one thousandth of a millimetre.
Current sample B
Inspect the drops.
The calculation is not shown yet.
The controls will become available when the geometry is ready.
Total surface with the same oil
Follow the oil share
A little oil can own
a lot of boundary.
Drag or tap the curve to change B’s oil share. The percentage slider does the same with arrow keys. B’s smaller radius stays fixed; the dashed line is kept A.
The outside of a sphere grows with radius squared. Its oil volume grows with radius cubed. Smaller spheres therefore expose more boundary per amount of oil.
Why measure the surface?
Loads a matched pair into both A and B.
An emulsion is one liquid dispersed as drops in another. In a dressing with the same amount of oil, a change in drop size can change how much surface the water touches. A drop count, an oil volume and a surface area answer different questions about the same sample.
This geometry helps you interpret a description of an emulsion. It does not tell you how a real dressing feels, how much whisking it needs or how long it stays mixed. The original equal-drop and emulsifier experiments keep those mechanisms separate.
Inspect the populations, averages and exact calculation
A count of whole spheres.
Both samples contain the oil in 100 reference spheres, each of radius 40 µm. This is 100 times the original Kitchen lesson’s reference amount. The smaller size receives the selected percentage of that fixed oil, with the rest in 40 µm drops. This choice makes every permitted count a whole number.
Add the groups. Do not replace their sizes with an arithmetic average first.
| Sample | Group | Radius (µm) | Count | Oil share | Surface share | Volume (µm³) | Surface (µm²) |
|---|
One radius can answer a narrower question.
An area-equivalent radius describes the uniform population that would give the same surface at this oil volume. It need not be a radius actually present. The arithmetic averages below answer different questions; they are not mistakes in themselves.
Assumptions: exact spheres of supplied size; no crowding, deformation, collisions, fluid motion, emulsifier dose, recipe or stability prediction. The illustration shows one representative of each size, not a microscope field or physical packing. This is a geometric experiment, not measured food data or food-safety guidance.
The endpoint populations are checked against the original equal-sphere model. A separately written exact-rational calculation checks all supported mixtures. These checks qualify the declared geometry, not real emulsions.