AptifoldContact

Movement Foundry / motion into mechanism

Make the wheel
do the lifting.

Turn the shaped wheel to lift the gate. Drag the gold handle to set how far it rises.

Cam and lift trace

Turn the computed wheel Fixed guide Guided follower ↺ Drag to turn

Lift above rest

Rise · follower moving up
Follower lift above rest over one cam turn

The blue dot tracks the follower’s height. Drag the wheel or scrub the trace to inspect the same moment. Arrow keys work too.

Ideal point contact

Drag the gold handle to set the full lift. The arrow keys change it by 1 mm, or by 5 mm with Shift.

One illustrated turn takes six seconds. This is playback, not an operating speed.

Why?

Base needed Lift

Give it a job.

Timing and geometric limits

Angles divide one 360° turn. The rest is a pause at the bottom. These are declared model limits, not engineering approval.

A roller can change how the wheel moves the gate. Shape the edge for a roller ↗

Two designs / one fair comparison

Keep one. Try another.

Keep A fixed while you change B. Compare the wheel’s size and the movement it requests.

Save the comparison below to reopen A and B together. Setup links keep B only.

Change B, keep A.

The workshop above has the same B settings, plus the remaining timing and limits.

Kept reference

Design A

Required radius

Kept A / profile files

Working design

Design B

Required radius

Current B / profile files

Preparing the current design…

Keep both designs

Bring this pair back.

Save A and B in one file. Open it here later to carry on comparing them.

Files stay on your device. Both shapes are recalculated when you open one. Individual profile exports above stay separate.

Dashed circles mark allowed space. The gold dashed outline in B is kept A. Both views expand together for a larger design; “Fit both views” resets their frame. Profiles stay unrotated, separate from the workshop’s inspected turn.

What changed?

The movement each shape requestsA dashed B solid
Compare all seven settings
Setting / unitKept AWorking BChange

Each SVG is one closed outline in millimetres. A design JSON keeps its exact brief, coordinates, model identity and limits. Outline sampling targets 0.001 mm from the ideal curve, apart from roundoff. This is computational accuracy, not a manufacturing tolerance.

Same lift · change the rise timing

How much room does this motion need?

A longer rise spreads the lift over more of the wheel’s turn, easing its steep edge. But the return and the minimum base can still set the size. Try it on the same design.

Required wheel radius
Required wheel radius as rise timing changes
  • Required wheel
  • Minimum base + lift
  • Available room

Why the curve bends

Two limits set the base.

The base is the wheel’s smallest radius. It must meet both requirements below.

Minimum base you set
Contact-angle limit

Take the larger base, then add the lift.

From a motion brief to a part. Cams turn rotation into timed movement in machines such as printing presses. Here you work backwards: request the movement, compute a shape, and check whether the geometric limits allow it. A real mechanism also needs contact, force, material and manufacturing checks.

Inside Movement Foundry

The shape is the instruction.

A cam stores a movement in its edge. As the wheel turns beneath a follower constrained to move up and down, a larger radius pushes it higher; a constant radius holds it still. Here the requested rise, pause and return determine that edge. The animation follows the computed geometry.

Why a quick lift needs more room

Ask for the same lift in fewer degrees and the edge gets steeper. The blue normal shows the direction perpendicular to that edge. Its angle from the follower’s vertical travel is the geometric contact, or pressure, angle. A bigger base softens it, but that bigger wheel must still fit inside your outer-radius limit.

The bench chooses the smallest base satisfying both your minimum radius and the angle limit. If the lift plus that base exceeds your available radius, this supported family cannot fit the brief. A slower rise may relieve the angle constraint while the minimum base still controls. Giving the part more space changes the boundary; reducing the lift changes the outline.

What the model designs

This is an ideal inline knife-edge point follower. Contact is assumed throughout. It is not a roller profile, and the drawing does not qualify the width of a real follower stem, contact force, springs, friction, materials, strength, wear or manufacturing. The shaded outline is a numerical polygon approximating the calculated curve.

Inspect the calculation

Equations and the continuous bound

Each motion event uses f(u)=10u³−15u⁴+6u⁵. Rise is hf(u), return is h[1−f(u)]. The body outline is P(θ)=((R+s)sinθ,(R+s)cosθ); positive world rotation θ puts its selected point at (0,R+s). Derivatives use radians.

The angle limit a requires R≥maxθ(|s′|/tan(a)−s). For the shorter rise/return span β, set b=βtan(a) and u*=4/[b+4+√(b²+16)]. The pressure requirement is h[f′(u*)/b−f(u*)]. Take the larger of that and your minimum base radius. This analytic maximum covers the whole event; chart samples alone would not establish it.

Position, velocity and acceleration join continuously. Jerk generally jumps. A relative 10⁻⁹ comparison band marks a result close to its geometric limit as “on the limit”; it is a computational convention, not a physical tolerance. There is no dynamics or operating-speed calculation.

Source

CMU’s Introduction to Mechanisms, chapter 6 explains cam inversion, motion events, point/roller distinctions and pressure angle. The coordinate convention, quintic request family and computations here are declared teaching constructions.

Independent numerical and geometric reconstruction checks support the declared ideal model. These checks do not qualify a real machine or establish that a new visitor understands the model.

APTIFOLD / AGENTIC AI

What would you like to work through?

Aptifold develops its own agentic AI to investigate questions, test ideas and build working software. This experience is one example of that work.

Explore Aptifold Discuss a question

Company links open in a new tab, so you can keep this experiment open.